ARAI/TA(SM)/ESP/UNISCAN
SM/2006-22 Dated
16th Jun 2006
|
Cert |
Annex |
Drg |
Total |
|
1 |
0 |
0 |
1 pg |
CERTIFICATE
FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES
M/s
Environmental Systems Products
306,
Galleria, Hiranandani Gardens
Powai
Mumbai
400 076
The combined 4-Gas Analyser and
Smoke Meter Model “System 1” from M/s Environmental Systems Products, Mumbai,
was type approved vide Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July
2005 as per the test procedure approved by Ministry of Road Transport and
Highways, Government of India, New Delhi, and specified in
MoRTH/CMVR/TAP-115/116, Issue No.3, Part-VIII for 4-gas analyzer and smoke
meter.
Subsequently, based on request
from Environmental Systems Products, Mumbai, vide letter dated 22.12.2005, the
model name was changed from “System 1” to “Uniscan” for marketing purpose to
maintain same identity in international market.
M/s Environmental Systems
Products, Mumbai, vide letter dated 7th Jun 2006, requested to issue
separate certificates for 4-gas analyzer and smoke meter for marketing
independent units.
Based on the above, it is
certified that the Smoke Meter Model “Uniscan Smoke Meter” manufactured by M/s
Environmental Systems Products, USA, and marketed by M/s Environmental Systems
Products, Mumbai, meets the requirements of the provisions of Rule 116(3) of
the Central Motor Vehicles Rules 1989, as amended up-to-date, for the Smoke
Meter.
This type approval certificate
shall be read in conjunction with the Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/UNISCAN/2005-38 Dt.27th Dec 2005.
Authorized Signatory
A. B. Komawar Shrikant R Marahte
Dy. Director Director
Ref : i) Type Approval Test Report No.AED/SPR033/2005-06/2005-121 Dated 26 July 2005
ii) Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July
2005
ARAI issues
Type Approval/COP Certificates for vehicles / components / parts / assemblies
etc., based on the documents produced / submitted by the customer and on these
basis, the vehicles / components / parts / assemblies, etc., are examined and
if approved, the certificate is issued.
ARAI is in no way responsible for any misuse of copying of any design /
type / system in connection with entire vehicle / components / parts and
assemblies. Breach of any statutory
provision of Indian laws or laws of other countries, will be the sole
responsibility of the customer and ARAI shall not be liable for any claims or
damages, made by the party, whatsoever.
The customer shall alone be liable for the same and undertakes to
indemnify ARAI in this regard. Further,
the ARAI has the right to initiate cancellation / withdrawal of the certificate
issued, in case of any fraud, misrepresentation, when it surfaces and comes in
the knowledge of ARAI. The appropriate local courts at Pune shall have the
jurisdiction in respect of any dispute, claim or liability arising out of this
certificate.