ARAI/TA(MOD-SM)/AVL/437C_DISPEED490/2005-22 Dated
26th July 2005
CERTIFICATE
FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES
M/s AVL India Pvt. Ltd.
376-377, Udyog Vihar, Phase IV
Gurgaon 122 015
Smoke Meter Model AVL 437C from
M/s AVL India Pvt. Ltd., Gurgaon, was type approved vide Type Approval
Certificate dated 18th June 1998 as per the test procedure approved
by Ministry of Road Transport and Highways, Government of India, New Delhi, and
specified in MoRTH/CMVR/TAP-115/116, Part-VIII.
Smoke Meter Model AVL 437C from
M/s AVL India Pvt. Ltd., Gurgaon, was additionally examined and tested for
modifications such as incorporation of measurement of sump oil temperature,
piezoelectric type engine RPM sensor and free acceleration procedure as per the
revised test procedure specified in MoRTH/CMVR/TAP-115/116, Issue No.2,
Part-VIII, vide Type Approval Certificate No.ARAI/TA(MOD-SM)/AVL/437C/2004-16
dated 27th Aug 2004.
Subsequently Smoke Meter Model AVL
437C from M/s AVL India Pvt. Ltd., Gurgaon, was additionally examined and
tested for incorporation of measurement of engine RPM with Vibration Type
Sensor Model AVL DiSpeed 490.
Based on the above, it is certified that the Smoke Meter
Model AVL 437C along with Vibration Type Sensor Model AVL DiSpeed 490 for
measurement of engine RPM, manufactured and marketed by M/s AVL India Pvt.
Ltd., Gurgaon meets the requirements of the provisions of Rule 116(3) of the
Central Motor Vehicles Rules 1989, as amended up-to-date, for Smoke Meter.
This type approval certificate shall be read in conjunction with the Type Approval Certificate No. ARAI/TA(MOD-SM)/AVL/437C/2004-16 dated 27th Aug 2004.
Authorised Signatory
A. B. Komawar
B. Bhanot
Dy. Director Director
Ref :
i) ARAI Type approval Certificate No.
ARAI/CMVR/AVL/437/B/R 116(3)/98-06 dated 18th June 1998. (Original Type Approval Certificate)
ii)
Type Approval Test Report No.AED/SPR 058/2005-06/2005-120
dated 26th July 2005
ARAI issues Type Approval/COP Certificates for
vehicles / components / parts / assemblies etc., based on the documents
produced / submitted by the customer and on these basis, the vehicles /
components / parts / assemblies, etc., are examined and if approved, the certificate
is issued. ARAI is in no way
responsible for any misuse of copying of any design / type / system in
connection with entire vehicle / components / parts and assemblies. Breach of any statutory provision of Indian
laws or laws of other countries, will be the sole responsibility of the
customer and ARAI shall not be liable for any claims or damages, made by the
party, whatsoever. The customer shall
alone be liable for the same and undertakes to indemnify ARAI in this
regard. Further, the ARAI has the right
to initiate cancellation / withdrawal of the certificate issued, in case of any
fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI.
The appropriate local courts at Pune shall have the jurisdiction in respect of
any dispute, claim or liability arising out of this certificate.
Place
of Issue : Pune