ARAI/TA(4G/SM)/ESP/UNISCAN/2005-38                                                                  Dated 27th Dec 2005









1 pg





M/s Environmental Systems Products

306, Galleria, Hiranandani Gardens


Mumbai 400 076


The combined 4-Gas Analyser and Smoke Meter Model “System 1” from M/s Environmental Systems Products, Mumbai, was type approved vide Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July 2005 as per the test procedure approved by Ministry of Road Transport and Highways, Government of India, New Delhi, and specified in MoRTH/CMVR/TAP-115/116, Issue No.3, Part-VIII for 4-gas analyzer and smoke meter.


M/s Environmental Systems Products, Mumbai, have requested vide letter dated 22.12.2005 to change the model name from “System 1” to “Uniscan” for marketing purpose to maintain same identity in international market.


Based on the above, it is certified that the combined 4-Gas Analyzer and Smoke Meter Model “Uniscan” manufactured by M/s Environmental Systems Products, USA, and marketed by M/s Environmental Systems Products, Mumbai, meets the requirements of the provisions of Rule 116(3) of the Central Motor Vehicles Rules 1989, as amended up-to-date, for the 4-Gas Analyzer and Smoke Meter.


This type approval certificate shall be read in conjunction with the Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July 2005.

Authorized Signatory



A. B. Komawar                                                                                                             Shrikant R Marahte

Dy. Director                                                                                                                  Director


Ref : i)   Type Approval Test Report No.AED/SPR033/2005-06/2005-121 Dated 26 July 2005

        ii) Type Approval Test Report No.AED/SPR033/2005-06/2005-122 Dated 26 July 2005

       iii) Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July 2005


ARAI issues Type Approval/COP Certificates for vehicles / components / parts / assemblies etc., based on the documents produced / submitted by the customer and on these basis, the vehicles / components / parts / assemblies, etc., are examined and if approved, the certificate is issued.  ARAI is in no way responsible for any misuse of copying of any design / type / system in connection with entire vehicle / components / parts and assemblies.  Breach of any statutory provision of Indian laws or laws of other countries, will be the sole responsibility of the customer and ARAI shall not be liable for any claims or damages, made by the party, whatsoever.  The customer shall alone be liable for the same and undertakes to indemnify ARAI in this regard.  Further, the ARAI has the right to initiate cancellation / withdrawal of the certificate issued, in case of any fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI. The appropriate local courts at Pune shall have the jurisdiction in respect of any dispute, claim or liability arising out of this certificate.


Place of Issue : Pune