The EMI/EMC laboratory of AED accredited as per ISO 17025 is offering its evaluation testing services to the auto component, auto electronics, embedded & IT industry in the following areas:

Radiated Immunity

	As per test standards 95/54/EC, 2004/104/EC, ECE R-10, ISO 11452 etc.	ALSE Chamber
	Different test methods available viz. Free Field method in ALSE chamber (ISO 11452-2), TEM Cell method (ISO 11452-3), BCI method (ISO 11452-4), 150 mm Stripline method (ISO 11452-5)
	Electromagnetic field up to 100 V/m with different modulation like AM, FM, Pulse
	Frequency range of 10 kHz-2000 MHz
	The system allows video/audio as well as status monitoring of EUT for performance verification.

Radiated / Conducted Emission

	As per CISPR, ECE R-10, 95/54/EC, 2004/104/EC, etc.	EMI Test Receiver
	Frequency range : 150 kHz to 3000 MHz
	QP, Peak, Average detector measurements
	Tests performed in ALSE Chamber/OATS

Conducted Immunity and Transient Emissions

As per Test Standards such as ISO 7637, SAE J1113, SAE 1455, manufacturer specific standards, etc.

Electrostatic Discharge (ESD)

	As per Test Standard ISO:10605 and IEC 61000 4-2
	±30 kV Contact and Air Discharge
	Various RC combinations for discharge gun as per standards

EMI/EMC Testing of Industrial Electronic Systems

	IEC 61000-4-3, Radiated Immunity	Scan Tool
	IEC 61000-4-4, (EFT)Burst on power line
	IEC 61000-4-4, (EFT) Burst on signal line-capacitive coupling clamp
	IEC 61000-4-5, Surge on power line
	IEC 61000-4-11, Power fail simulation
	IEC 61000-4-8, Power frequency (50Hz) magnetic field
	IEC 61000-4-6, Conducted disturbances induced by radio frequency fields, CDN, EM clamp

The EMI/EMC laboratory has established "EMC PRECISION SCAN SYSTEM", a completely new engineering tool which provides near field measurements for printed circuit boards, and other electronic parts and wirings thus taking care of EMI problems at the design stage itself.