ARAI/TA(4G/SM)/ESP/UNISCAN/2005-38 Dated
27th Dec 2005
Cert |
Annex |
Drg |
Total |
1 |
0 |
0 |
1 pg |
CERTIFICATE
FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES
M/s
Environmental Systems Products
306,
Galleria, Hiranandani Gardens
Powai
Mumbai
400 076
The
combined 4-Gas Analyser and Smoke Meter Model “System 1” from M/s Environmental
Systems Products, Mumbai, was type approved vide Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July
2005 as per the test procedure
approved by Ministry of Road Transport and Highways, Government of India, New
Delhi, and specified in MoRTH/CMVR/TAP-115/116, Issue No.3, Part-VIII for 4-gas
analyzer and smoke meter.
M/s
Environmental Systems Products, Mumbai, have requested vide letter dated 22.12.2005
to change the model name from “System 1” to “Uniscan” for marketing purpose to
maintain same identity in international market.
Based on the above, it is certified that the combined
4-Gas Analyzer and Smoke Meter Model “Uniscan” manufactured by M/s
Environmental Systems Products, USA, and marketed by M/s Environmental Systems
Products, Mumbai, meets the requirements of the provisions of Rule 116(3) of
the Central Motor Vehicles Rules 1989, as amended up-to-date, for the 4-Gas
Analyzer and Smoke Meter.
This type approval certificate shall be read in
conjunction with the Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July
2005.
Authorized
Signatory
A. B. Komawar Shrikant R Marahte
Dy. Director Director
Ref : i) Type Approval Test Report No.AED/SPR033/2005-06/2005-121 Dated 26 July 2005
ii) Type Approval Test Report No.AED/SPR033/2005-06/2005-122
Dated 26 July 2005
iii) Type Approval Certificate No. ARAI/TA(4G/SM)/ESP/SYSTEM 1/2005-23 Dated 26th July
2005
ARAI issues
Type Approval/COP Certificates for vehicles / components / parts / assemblies
etc., based on the documents produced / submitted by the customer and on these
basis, the vehicles / components / parts / assemblies, etc., are examined and
if approved, the certificate is issued.
ARAI is in no way responsible for any misuse of copying of any design /
type / system in connection with entire vehicle / components / parts and
assemblies. Breach of any statutory
provision of Indian laws or laws of other countries, will be the sole
responsibility of the customer and ARAI shall not be liable for any claims or
damages, made by the party, whatsoever.
The customer shall alone be liable for the same and undertakes to
indemnify ARAI in this regard. Further,
the ARAI has the right to initiate cancellation / withdrawal of the certificate
issued, in case of any fraud, misrepresentation, when it surfaces and comes in
the knowledge of ARAI. The appropriate local courts at Pune shall have the
jurisdiction in respect of any dispute, claim or liability arising out of this
certificate.