ARAI/TA(4G_EMC)/MODI/MEXA 554JA/2005-30                                                       Dated 7th Oct 2005

 

Cert

Annex

Drg

Total

1

0

0

1 pg

 

CERTIFICATE

FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES

 

M/s Modi Measurement Systems Pvt. Ltd.

219, Hill View Industrial Estate, Amrutnagar Road

Off. L.B.S.Marg, Ghatkopar (W)

Mumbai 400 086

 

Exhaust Gas Analyzer Model MEXA 554JA from Modi Measurement Systems Pvt. Ltd., Mumbai, was type approved vide Type Approval Certificate No. ARAI/TA(4G)/MODI/MEXA 554JA/2004-25 dated 11th  October 2004 as per the test procedure approved by Ministry of Road Transport and Highways, Government of India, New Delhi, and specified in MoRTH/CMVR/TAP-115/116, Issue No.2, Part-VIII for 4-gas analyzer (except for the requirements of RF electromagnetic field test as per Clause 9.5(e) of the test procedure).

 

Exhaust Gas Analyzer Model MEXA 554JA from Modi Measurement Systems Pvt. Ltd., Mumbai, was additionally examined and tested for the requirements of RF electromagnetic field test as per Clause 9.5(e) of the test procedure mentioned above.

 

Based on the above, it is certified that the 4-Gas Analyzer Model MEXA 554JA manufactured by M/s Horiba Ltd., Japan, and marketed by M/s Modi Measurement Systems Pvt. Ltd., Mumbai, meets the requirements of the provisions of Rule 116(3) of the Central Motor Vehicles Rules 1989, as amended up-to-date, for the 4-Gas Analyzer.

 

This type approval certificate shall be read in conjunction with the Type Approval Certificate No. ARAI/TA(4G)/MODI/MEXA 554JA/2004-25 dated 11th  October 2004.

Authorized Signatory

 

 

A. B. Komawar                                                                                                             Shrikant R Marahte

Dy. Director                                                                                                                  Director

 

Ref : i)  Type Approval Test Report No AED/TR/SPR063/2004-05/Modi-Mumbai/2004-123

            Dated 11th October 2004

        ii) Type Approval Test Report No. AED/SPR081/2005-06/2005-146 Dated 7th Oct 2005

ARAI issues Type Approval/COP Certificates for vehicles / components / parts / assemblies etc., based on the documents produced / submitted by the customer and on these basis, the vehicles / components / parts / assemblies, etc., are examined and if approved, the certificate is issued.  ARAI is in no way responsible for any misuse of copying of any design / type / system in connection with entire vehicle / components / parts and assemblies.  Breach of any statutory provision of Indian laws or laws of other countries, will be the sole responsibility of the customer and ARAI shall not be liable for any claims or damages, made by the party, whatsoever.  The customer shall alone be liable for the same and undertakes to indemnify ARAI in this regard.  Further, the ARAI has the right to initiate cancellation / withdrawal of the certificate issued, in case of any fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI. The appropriate local courts at Pune shall have the jurisdiction in respect of any dispute, claim or liability arising out of this certificate.

 

Place of Issue : Pune