ARAI/TA(4G_EMC)/MADHUS/IPEX-D/2005-27                                                          Dated 7th Oct 2005

 

Cert

Annex

Drg

Total

1

0

0

1 pg

 

CERTIFICATE

FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES

 

M/s Madhus Garage Equipments

C-03, Brigade MM, K.R.Road

Bangalore 560 082

 

Exhaust Gas Analyzer Model IPEX-D from M/s.Madhus Garage Equipments, Bangalore, was type approved vide Type Approval Certificate No.ARAI/TA(4G)/MADHUS/IPEX-D/2004-31 dated 3rd December 2004 as per the test procedure approved by Ministry of Road Transport and Highways, Government of India, New Delhi, and specified in MoRTH/CMVR/TAP-115/116, Issue No.2, Part-VIII for 4-gas analyzer (except for the requirements of RF electromagnetic field test as per Clause 9.5(e) of the test procedure).

 

Exhaust Gas Analyzer Model IPEX-D from M/s.Madhus Garage Equipments, Bangalore, was additionally examined and tested for the requirements of RF electromagnetic field test as per Clause 9.5(e) of the test procedure mentioned above.

 

Based on the above, it is certified that the 4-Gas Analyzer Model IPEX-D manufactured by Protech s.r.l., Italy, and marketed by M/s Madhus Garage Equipments, Bangalore, meets the requirements of the provisions of Rule 116(3) of the Central Motor Vehicles Rules 1989, as amended up-to-date, for the 4-Gas Analyzer.

 

This type approval certificate shall be read in conjunction with the Type Approval Certificate No. ARAI/TA(4G)/MADHUS/IPEX-D/2004-31dated 3 Dec 2004.

 

Authorised Signatory

 

 

A. B. Komawar                                                                                                             Shrikant R Marathe

Dy. Director                                                                                                                  Director

 

Ref : i)  Type Approval Test Report No AED/TR/SPR No 096/2004-05 /Madhus-Bangalore/2004-151

            Dated 03rd Dec. 2004

        ii)  Type Approval Test Report No. AED/SPR072/2005-06/2005-136 Dated 13th September 2005

 

ARAI issues Type Approval/COP Certificates for vehicles / components / parts / assemblies etc., based on the documents produced / submitted by the customer and on these basis, the vehicles / components / parts / assemblies, etc., are examined and if approved, the certificate is issued.  ARAI is in no way responsible for any misuse of copying of any design / type / system in connection with entire vehicle / components / parts and assemblies.  Breach of any statutory provision of Indian laws or laws of other countries, will be the sole responsibility of the customer and ARAI shall not be liable for any claims or damages, made by the party, whatsoever.  The customer shall alone be liable for the same and undertakes to indemnify ARAI in this regard.  Further, the ARAI has the right to initiate cancellation / withdrawal of the certificate issued, in case of any fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI. The appropriate local courts at Pune shall have the jurisdiction in respect of any dispute, claim or liability arising out of this certificate.

 

Place of Issue : Pune