"

 

 

 

 

 

 

ARAI/TA(SM_ALTRPM)/PRECISION/PSM-0786/2006-29                                         Dated 21st Aug 2006

 

 

Cert

Annex

Drg

Total

1

0

0

1 pg

 

CERTIFICATE

FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES

 

M/s Precision Testing Machines Pvt. Ltd.

S-12, Okhla Indl. Area, Phase II,

New Delhi 110 020

 

Smoke Meter Model PSM-0786 from M/s Precision Testing Machines Pvt. Ltd., New Delhi, was type approved vide Type Approval Certificate dated 10th Nov 2005 as per the test procedure approved by Ministry of Road Transport and Highways, Government of India, New Delhi, and specified in MoRTH/CMVR/TAP-115/116, Part-VIII. 

 

Subsequently Smoke Meter Model PSM-0786 from M/s Precision Testing Machines Pvt. Ltd., New Delhi, was additionally examined and tested for incorporation of measurement of engine RPM with Battery Type Sensor Model CAP 8500. 

 

Based on the above, it is certified that the Smoke Meter Model PSM-0786 along with Battery Type Sensor Model CAP 8500 for measurement of engine RPM, manufactured by M/s.Capelec, France, and marketed by M/s Precision Testing Machines Pvt. Ltd., New Delhi, meets the requirements of the provisions of Rule 116(3) of the Central Motor Vehicles Rules 1989, as amended up-to-date, for Smoke Meter.

 

This type approval certificate shall be read in conjunction with the Type Approval Certificate No. ARAI/TA(SM)/PRECISION/PSM-0786/2005-31 Dated 10th Nov 2005.

 

                                                                                                                        Authorised Signatory

 

 

A. B. Komawar                                                                                                Shrikant R.Marathe

Dy. Director                                                                                                     Director

 

Ref : i)  ARAI Type approval Certificate No. ARAI/TA(SM)/PRECISION/PSM-0786/2005-31 Dt.10th Nov 2005

             (Original Type Approval Certificate)

ii)  Type Approval Test Report No. AED/SPR048/2006-07/2006-194 Dt.21st Aug 2006

 

ARAI issues Type Approval/COP Certificates for vehicles / components / parts / assemblies etc., based on the documents produced / submitted by the customer and on these basis, the vehicles / components / parts / assemblies, etc., are examined and if approved, the certificate is issued.  ARAI is in no way responsible for any misuse of copying of any design / type / system in connection with entire vehicle / components / parts and assemblies.  Breach of any statutory provision of Indian laws or laws of other countries, will be the sole responsibility of the customer and ARAI shall not be liable for any claims or damages, made by the party, whatsoever.  The customer shall alone be liable for the same and undertakes to indemnify ARAI in this regard.  Further, the ARAI has the right to initiate cancellation / withdrawal of the certificate issued, in case of any fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI. The appropriate local courts at Pune shall have the jurisdiction in respect of any dispute, claim or liability arising out of this certificate.

 

Place of Issue : Pune