ARAI/TA(4G/SM)/PRECISION/PES-0786/2006-25                                                    Dated 29th June 2006

 

Cert

Annex

Drg

Total

1

0

0

1 pg

CERTIFICATE

FOR COMPLIANCE TO THE CENTRAL MOTOR VEHICLES RULES

 

M/s Precision Testing Machines Pvt. Ltd.

S-12, Okhla Indl. Area, Phase II,

New Delhi 110 020

 

Exhaust Gas Analyser Model PEA-0786 from M/s Precision Testing Machines Pvt. Ltd., New Delhi, was type approved as per the revised test procedure approved by Ministry of Road Transport and Highways, Government of India, New Delhi, and specified in MoRTH/CMVR/TAP-115/116, Issue No.2, Part-VIII for 4-gas analyzer, vide Type Approval Certificate No. ARAI/TA(4G)/PRECISION/PEA-0786/2004-34 dated 13 Dec 2004.

 

Smoke Meter Model PSM-0786 from M/s Precision Testing Machines Pvt. Ltd., New Delhi, was type approved as per the revised test procedure approved by Ministry of Road Transport and Highways, Government of India, New Delhi, and specified in MoRTH/CMVR/TAP-115/116, Issue No.3, Part-VIII for smoke meter, vide Type Approval Certificate No. ARAI/TA(SM)/PRECISION/PSM-0786/2005-31 dated 10th Nov 2005.

 

Based on the above, it is certified that the combined 4-Gas Analyser and Smoke Meter Model “PES-0786” manufactured by M/s CAPELEC s.a.r.l, France, and marketed by M/s Precision Testing Machines Pvt. Ltd., New Delhi, meets the requirements of the provisions of Rule 116(3) of the Central Motor Vehicles Rules 1989, as amended up-to-date, for the 4-gas analyzer and smoke meter.

 

The combined 4-Gas Analyser and Smoke Meter Model “PES-0786” is suitable for measurement of idling CO and HC of in-use vehicles fitted with SI engines and free acceleration smoke of in-use diesel vehicles fitted with CI engines, as per CMVR 115(2).

 

This type approval certificate shall be read in conjunction with Type Approval Certificate Nos. ARAI/TA(4G)/PRECISION/PEA-0786/2004-34 dated 13.12.2004 and ARAI/TA(SM)/PRECISION/PSM-0786/2005-31 dated 10.11.2005.

 

Authorised Signatory

 

 

A. B. Komawar                                                                                                             Shrikant R. Marathe

Dy. Director                                                                                                                  Director

 

Place of Issue : Pune

 

Ref : i)   Type Approval Certificate No. ARAI/TA(4G)/PRECISION/PEA-0786/2004-34 dated 13.12.2004

       ii)   Type Approval Certificate No.ARAI/TA(SM)/PRECISION/PSM-0786/2005-31 dated 10.11.2005

 

ARAI issues Type Approval Certificates for vehicles / components / parts / assemblies etc., based on the documents produced / submitted by the customer and on these basis, the vehicles / components / parts / assemblies, etc., are examined and if approved, the certificate is issued.  ARAI is in no way responsible for any misuse of copying of any design / type / system in connection with entire vehicle / components / parts and assemblies.  Breach of any statutory provision of Indian laws or laws of other countries, will be the sole responsibility of the customer and ARAI shall not be liable for any claims or damages, made by the party, whatsoever.  The customer shall alone be liable for the same and undertakes to indemnify ARAI in this regard.  Further, the ARAI has the right to initiate cancellation / withdrawal of the certificate issued, in case of any fraud, misrepresentation, when it surfaces and comes in the knowledge of ARAI. The appropriate local courts at Pune shall have the jurisdiction in respect of any dispute, claim or liability arising out of this certificate.